How to remove the base of the ergonomic chair? How to remove the air pressure rod of the engineering chair?
1. How to remove the base of the ergonomic chair
Compared with the installation of an office chair, the disassembly of the chair is more difficult, because the buckle between the air rod and the chair foot will be relatively tight after long-term use. Pay attention to safety when disassembling. So how to remove the base of the ergonomic chair?
To disassemble the base, we first separate the back of the chair, then raise the air pressure rod to the highest level, hold the seat cushion with one hand, press the lifting paddle with the other hand, and shake it a few times to remove it.
2. How to disassemble the air pressure rod of the engineering chair
Disassemble the air pressure rod, after we separate the base from the air pressure rod, we can remove the air pressure rod, how to remove the air pressure rod for specific engineering chairs, continue to look down!
1. It is recommended not to disassemble it by yourself, but to find a professional to dismantle it. If it is not disassembled properly, it will explode. This is not a joke.
2. The lifting rod of the computer chair is designed in an inverted cone shape, that is, it is directly plugged in during installation, without screws, welding and other means, so it is easier to disassemble.
3. Therefore, when dismantling, directly raise the air rod to the highest level, which is convenient to start, and knock the chassis with a hammer along the lifting rod, and it will automatically fall off.
4. However, be careful when knocking. Do not knock on one point all the time. The chassis with poor quality is easy to break. You can knock in circles. You must master the strength when disassembling.
5. It is very simple to disassemble the air pressure stick, as long as you firmly believe that you can succeed, you will definitely be able to come down, just knock it down. However, the longer the chair, the tighter the card will be, and it will be more difficult to knock.
